EWP®80 Kit Remote Electric Water Pump (PART #8005)
The EWP®80 Electric Water Pump – simple, do-it-yourself, easy to install, designed to complement or replace your existing belt-driven, mechanical water pump. It will fit most vehicle makes and models fitted with naturally-aspirated or turbo engines up to two litres. The revolutionary, Australian-designed EWP®80 is made from anti-corrosive, lightweight, heat-resistant, glass-filled nylon and incorporates a ceramic faced seal for long-life durability.
The EWP®80 greatly enhances engine cooling control while giving you added power and improved fuel economy. By removing the parasitic power losses of a belt-driven, mechanical water pump the EWP® can provide up to 10kW (13hp) of extra power and increased torque and used extensively in Intercooler applications.
CONTENTS |
PART DESCRPTION |
UNITS |
EWP®80 - Nylon 12V Assembly
|
1 |
Nylon Flange Adapter: 35mm 90° Elbow |
1 |
Nylon Flange Adapter: 35mm Straight |
1 |
EWP ADAPTOR O-RING |
2 |
Adaptor - Rubber Sleeve - 3mm {1/8"}
(Increase hose fitting size to 38mm)
*For larger hose size, you will need 6mm sleeves (Part #18511) which will increase adaptor to fit hose size 41~42mm *Sold Seperately
|
2 |
HOSE CLAMP |
2 |
EWP® BASIC PUMP LOOM |
1 |
RED - Wire Joiner |
1 |
RED - 6mm Ring Terminal |
1 |
RELAY - 12V 40 Amp 5 Pin W/- Resistor Protection |
1 |
SCREW - SELF TAP 8X3/8 BZ |
1 |
5x12 Flanged Hex Set Screw Zinc Silver |
6 |
5x16 Flanged Hex Set Screw Zinc Silve |
6 |
M5 FLANGE NUT ZINC SILVER |
6 |
TECHNICAL SPECIFICATIONS |
Operating voltage |
3V DC to 15V DC |
Maximum current |
7.5A @ 13V |
Flow rate (max) |
90 L/min (23.8 US gal/min) @ 13V DC |
Operating temp. |
-40° to 120°C (-40° to 248°F) |
Pump design |
Clockwise centrifugal with volute chamber
|
Pump weight |
900 grams (2.0 lb) |
Pump material |
Nylon 66, 30% glass-filled |
Burst pressure |
350 kPa (50 psi) |
Seal |
Ceramic face seal |
Self Priming
|
No, none of our pumps are self-priming
|
Fits hose size
|
32mm to 51mm (1⅜” to 2”)
|